教职员工

当前位置 :首页>教职员工

李明杰

研究助理教授
个人简介

个人主页

李明杰博士,于2014年5月获得美国宾夕法尼亚州立大学学士学位,2018年12月获得美国伦斯勒理工学院博士学位,2019-2021年于南方科技大学任博士后,2022年2月加入深港微电子学院。李明杰博士近期主要从事微纳加工的应用研究,包括非晶合金纳米压印模板,超疏水表面,微型气体传感器和静电能量采集器等。李明杰博士近三年以第一(或通讯)作者身份共发表SCI论文14篇,包含ACS Appl. Nano Mater.,Surf. Coat. Technol.,Langmuir,Metall. Mater. Trans. A等。
教育经历

2018年,美国伦斯勒理工学院,博士学位
2014年,美国宾夕法尼亚州立大学,学士学位

工作经历

2021年8月至今,南方科技大学,研究助理教授
2019年5月至2021年5月,南方科技大学,博士后
2019年3月至2019年4月,美国伦斯勒理工学院,博士后

研究简介

纳米压印技术
金属半导体氧化物气体传感器
微型静电能量采集器
透明超疏水表面

所获荣誉

代表文章

代表性论文(近三年发表)
14.Wenxin Luo, Jingfu Xu, Gang Li, Gaoqiang Niu, Kar Wei Ng, Fei Wang, and Mingjie Li*, Facile Fabrication of Robust, Anti-reflective, Transparent Superhydrophobic Coatings with a Micropatterned Multilayer Structure, Langmuir 38(23) 7129-7136 (2022).
13.Mingjie Li, Wenxin Luo, Haoyang Sun, Mingxiang Zhang, Kar Wei Ng, Fei Wang, and Xing Cheng, Low-cost Preparation of Durable, Transparent, Superhydrophobic Coatings with Excellent Environmental Stability and Self-cleaning Function, Surf. Coat. Technol. 128367 (2022).
12.Mingjie Li, Wenxin Luo, Jingfu Xu, Juan Zhang, Kar Wei Ng, and Xing Cheng, Fabrication and Oxidation of Amorphous Zr-based Alloy for Imprint Lithography, Microelectron. Eng. 256 111722 (2022).
11.Mingjie Li, Wenxin Luo, Haoyang Sun, Jingfu Xu, and Xing Cheng, Superhydrophobic Coatings Fabricated by Paraffin Wax and Silica Nanoparticles with Enhanced Adhesion Stability, Mater. Lett. 309 131316 (2022).
10.Mingjie Li, Wenxin Luo, Haoyang Sun, Jingfu Xu, Kar Wei Ng, and Xing Cheng, Micropatterned Amorphous Zr-Based Alloy Coated with Silica Nanoparticles as Superhydrophobic Surfaces against Abrasion, ACS Appl. Nano Mater. 4(11) 12300-12307 (2021).
9.Mingjie Li, Wenxin Luo, Yulong Chen, Yini Zheng, and Xing Cheng, Fabrication and Nanoindentation Characterization of Nickel Micro-pillar Mold for Nanoimprint Lithography, Microelectron. Eng. 250 111636 (2021).
8.Mingjie Li, Wenxin Luo, Yulong Chen, and Xing Cheng, Nickel Micro-Pillar Mold Produced by Pulse and Pulse-Reverse Current Electrodeposition for Nanoimprint Lithography, Mater. Lett. 301 130310 (2021).
7.Mingjie Li, Yulong Chen, Wenxin Luo, and Xing Cheng, Durable and Flexible Hydrophobic Surface with Micropatterned Composite Metal-Polymer Structure, Langmuir 37(19) 5838-5845 (2021).
6.Mingjie Li, Yulong Chen, Wenxin Luo, and Xing Cheng, Interfacial Interactions during Demolding in Nanoimprint Lithography, Micromachines 12(4) 349 (2021).
5.Mingjie Li, Yulong Chen, Wenxin Luo, and Xing Cheng, Demolding Force Dependence on Mold Surface Modifications in UV Nanoimprint Lithography, Microelectron. Eng. 236 111470 (2021).
4.Yulong Chen†, Mingjie Li†, Wenjun Yan, Xin Zhuang, Kar Wei Ng, and Xing Cheng, Sensitive and Low-Power Metal Oxide Gas Sensor with Low-Cost Microelectromechanical Heater, ACS Omega 6(2) 1216-1222 (2021).
3.Mingjie Li, Yulong Chen, Wenxin Luo, and Xing Cheng, Nanoindentation Behavior of UV-curable Resist and Its Correlation with Patterning Defect in Nanoimprint Lithography, J. Micromech. Microeng. 30 065010 (2020).
2.Mingjie Li, Xinglong Huang, Wenxin Luo, Yulong Chen, Fei Han, and Xing Cheng, Thermal Degradation Behavior of Self-assembled Monolayer Surfactant on Silicon Substrate, J. Vac. Sci. Technol. B 38 032602 (2020).
1.Mingjie Li, David J. Duquette, and Ying Chen, Deformation Accommodation at Triple Junctions in Columnar-Grained Nickel, Metall. Mater. Trans. A 50 52-57 (2019).